Question | Potential Answers | Answer |
---|---|---|
Q1. Enter the name of your training organisation | ||
Q2. Enter the name of the training program you have just completed | ||
Q3. How thoroughly did your training organisation cover RAC technician obligations under the Ozone Protection and Synthetic Greenhouse Gas Management Regulations 1995? | □ I don't remember this being covered
□ This was briefly mentioned □ This was covered to a moderate extent □ This was covered thoroughly
|
We’ve provided Fact Sheet 11 - Penalties increase for offences listed under the Ozone Act and Regulations - as part of the graduate pack, and you can find a link to the Act and the Regulations here.
You can keep these as a reminder of your obligations and to help you keep compliant! |
Q4. How confident do you feel in your knowledge of refrigerant handling requirements? |
□ Not confident at all □ Slightly confident □ Somewhat confident □ Quite confident □ Extremely confident |
Additional information on refrigeration handling requirements is included in Fact Sheet 17 and Fact Sheet 19; in the refrigerant handling code of practice part 1 and refrigerant handling code of practice part 2; and in the automotive code of practice. |
Q5. What general recommendations/feedback do you have to improve training programs? | N/A | N/A |
Q6. “Topping up” is not allowed under the Australian and New Zealand Codes of Practice for handling both stationary and automotive refrigerant systems. What are the consequences of “topping up”? (select all that apply) |
□ Customer may still have an unresolved leak in their system. This can lead to repeat calls and bad reviews for your business. □ Could potentially be dangerous □ Is against ARCTick Licence conditions. □ Leaking of refrigerant gases contributes to climate change.
|
The correct answer to this question about topping up is “all of the above”. |
Q7. To avoid mixing refrigerants, you should (select all that apply) |
□ Correctly label the refrigerant type in systems □ Make sure you identify the refrigerant in systems before fixing them □ Ensure your recovery cylinders are the right type for the refrigerant identified and are labelled correctly □ Use R32 for recharging all systems;
|
DO follow these steps to prevent the mixing of refrigerants: □ Correctly label the refrigerant type □ Identify the refrigerant before fixing systems □ Ensure recovery cylinders are the right type and labelled correctly
DO NOT use R32 for recharging all systems; |
Q8. Deliberately venting a small amount of refrigerant (250g) is allowed if recovery would be time-consuming |
□ True □ False |
FALSE: Deliberate venting of any amount of refrigerant is not allowed under the Ozone and Synthetic Greenhouse Gas Management Act 1989. If you get caught doing this, you could be liable for penalties as listed in Fact Sheet 11, included in your graduate pack. |
Q9. Select all of the equipment that an RHL holder should own to undertake their work in a manner which prevents refrigerant emissions |
□ Gauge manifold and hoses □ Electronic leak detector or leak detection solution □ Oxygen free nitrogen, a regulator and hoses □ Additional long hose □ Tension wrenches and lubricating oil □ Large shifting spanner □ Flaring tools □ Tube cutter and deburring tool □ Vacuum gauge □ Vacuum pump □ Electronic scales □ Refrigerant recovery unit □ Refrigerant reclaim cylinder □ Gauge lines with valves |
RHL holders should own all of this equipment in order to undertake their work in a manner which prevents refrigerant emissions. |
Q10. Failure to comply with requirements can result in which of the following under the Ozone Protection and Synthetic Greenhouse Gas Management legislation? (select all that apply) |
□ a fine □ a licence renewal being refused □ jail time
|
Fact Sheet 11 - Penalties increase for offences listed under the Ozone Act and Regulations – lists penalties under the Act. They DO include fines and refusal of licence renewal. They DO NOT include jail time. |